Mortise Locks

A156.13 Mortise Locks ASSA ABLOY Asia Pacific Ltd

New Search

Contact:
cs.auyeung@assaabloy.com

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2012

Keywords:
A156.13-2012, Mortise Locks, ASSA ABLOY Asia Pacific Ltd

Company:
ASSA ABLOY ASIA PACIFIC LTD

Product Line: 
Mortise Locks
Updated: 
Fri, 01/27/2017
ANSI/BHMA A156.13 Mortise Locks

A156.13 2012 Mortise Locks

New Search

Contact:
arinmhc1@naver.com
82-31-737-2385

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Keywords:
A156.13, Mortise Locks, ARIN

Company:
Arin m.h.c Co,. Ltd.
Visit Website

Product Line: 
Mortise Locks
Updated: 
Mon, 04/13/2015
ANSI/BHMA A156.13 Mortise Locks

ANSI / BHMA A156.13 Mortise Locks

New Search

Contact:
gayan@uifczo.com

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2012

Keywords:
A156.13, mortise, locks, mortise locks

Company:
Universal International FZCO

Product Line: 
Mortise Locks
Updated: 
Fri, 06/26/2015
ANSI/BHMA A156.13 Mortise Locks

ANSI / BHMA A156.13 Mortise Locks

New Search

Contact:
iteklockus@gmail.com

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2013

Keywords:
A156.13, mortise, locks, mortise locks

Company:
I-Tek Metal Manufacturing Inc

Product Line: 
Mortise Locks
ANSI/BHMA A156.13 Mortise Locks

ANSI / BHMA A156.13 Mortise Locks

New Search

Contact:
mrisden@mbestsecurity.com

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2012

Keywords:
A156.13, mortise locks, mortise, locks

Company:
Marshall Best Security Corporation
Visit Website

Product Line: 
Mortise Locks
ANSI/BHMA A156.13 Mortise Locks

ANSI / BHMA A156.13 Mortise Locks

New Search

Contact:
steve_deeming@eu.irco.com

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2012

Company:
Allegion (UK)
Visit Website

Product Line: 
Mortise Locks
Updated: 
Mon, 01/27/2014
ANSI/BHMA A156.13 Mortise Locks

ANSI/BHMA A156.13 Mortise Locks

New Search

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2012

Company:
Allegion (China)
Visit Website

Product Line: 
Mortise Locks
Updated: 
Wed, 04/09/2014
ANSI/BHMA A156.13 Mortise Locks

ANSI / BHMA Mortise Locks

New Search

Contact:
ek.park@angellock.co.kr
82 53 581 0049

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Keywords:
A156.13, Mortise Locks, Angel Metal

Company:
Angel Metal, an ASSA ABLOY Group brand
Visit Website

Product Line: 
Mortise Locks
Updated: 
Wed, 12/23/2015
ANSI/BHMA A156.13 Mortise Locks

A156.13 - Mortise Locks

New Search

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Publication Year:
2014

Keywords:
ANSI/BHMA A156.13, Mortise Locks, 2014, Philadelphia Hardware Group

Company:
Philadelphia Hardware Group, INC
Visit Website

Product Line: 
Mortise Locks
Updated: 
Wed, 01/29/2014
ANSI/BHMA A156.13 Mortise Locks

A156.13 DORMA Gulf Door Controls

New Search

Standard:
ANSI/BHMA A156.13 Mortise Locks

Scope

ANSI/BHMA A156.13 - 2017 Mortise Locks

 

1. SCOPE
1.1 This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
 
1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions.
 
1.4 Grade Qualifications
 
1.4.1 Two classifications of Grades are described in this Standard. Manufacturers shall indicate separately, for both an Operational Grade and a Security Grade level of mortise locks and latches. The minimum acceptable grade level for Operational and Security grades shall be a grade 3.
 
1.4.1.1 Operational Grades shall meet the requirements of Sections 8, 9, 10, 11 and 13.
 
1.4.1.2 Security Grades shall meet the requirements of Section 12.
 
1.4.2 Any function shall be tested for qualification under Operational Grades and all other functions shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.
 
1.4.3 Function F21 or a similar function with dead bolts and function F04 or a similar function without dead bolts to be certified shall be tested with the trim for qualification under Security Grades. All other functions where access is prevented shall be considered as meeting the criteria provided the lock case and operating parts are of the same construction as that of the lock previously tested.

 

Keywords:
MORTISE LOCKS & LATCHES, CERTIFIED MORTISE LOCK AND LATCHES, A156.13, 2005, Mortise Locks, A156.13, 2005

Company:
DORMA Gulf Door Controls

Product Line: 
Mortise Locks
Updated: 
Wed, 01/16/2013
ANSI/BHMA A156.13 Mortise Locks
Syndicate content