Door Control-Closers

A156.4 ASSA ABLOY Security Solutions Middle East

New Search

Contact:
nassim.yousef@assaabloy.com
971 (0) 4 880 4888

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2008

Keywords:
A156.4, Closers, ASSA ABLOY Middle East, 2008

Company:
ASSA ABLOY Security Solutions Middle East

Product Line: 
Door Control-Closers
Updated: 
Tue, 12/12/2017
ANSI/BHMA A156.4 Door Controls-Closers

A156.4 Closers ASSA ABLOY Asia Pacific Ltd

New Search

Contact:
cs.auyeung@assaabloy.com

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2008

Keywords:
2008, A156.4, Closers, ASSA ABLOY Asia Pacific

Company:
ASSA ABLOY ASIA PACIFIC LTD

Product Line: 
Door Control-Closers
Updated: 
Tue, 11/21/2017
ANSI/BHMA A156.4 Door Controls-Closers

A156.4 2013 Closers Suzhou Fuerda Industry Co., Ltd.

New Search

Contact:
alex@cnfrd.cn
86 512 81600816

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Keywords:
A156.4, Closers, A156.4-2013, Suzhou Fuerda

Company:
Suzhou Fuerda Industry Co. Ltd

Product Line: 
Door Control-Closers
Updated: 
Thu, 07/13/2017
ANSI/BHMA A156.4 Door Controls-Closers

A156.4 Closers Pamex Inc.

New Search

Contact:
sales@pamexinc.com
909-606-4168

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2013

Keywords:
A156.4, Closers, Pamex Inc., A156.4-2013

Company:
Pamex Inc.
Visit Website

Product Line: 
Door Control-Closers
Updated: 
Fri, 05/26/2017
ANSI/BHMA A156.4 Door Controls-Closers

A156.4 Closers Dorma Gulf

New Search

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2013

Keywords:
A156.4, Closers, Dorma Gulf

Company:
DORMA Gulf Door Controls

Product Line: 
Door Control-Closers
Updated: 
Tue, 02/28/2017
ANSI/BHMA A156.4 Door Controls-Closers

A156.4 ARIN m.h.c Co. Ltd.

New Search

Contact:
arinmhc1@naver.com
82-31-737-2385

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2013

Keywords:
A156.4, door control-closers, door control, ARIN

Company:
Arin m.h.c Co,. Ltd.
Visit Website

Product Line: 
Door Control-Closers
Updated: 
Wed, 05/11/2016
ANSI/BHMA A156.4 Door Controls-Closers

A156.4 Saehan Hardware

New Search

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2002

Keywords:
SAEHAN, A156.4-2002, Door Controls, Closers

Company:
Saehan Hardware Company

Product Line: 
Door Control-Closers
Updated: 
Wed, 12/23/2015
ANSI/BHMA A156.4 Door Controls-Closers

ANSI / BHMA A156.4 Door Control- Closers

New Search

Contact:
gayan@uifczo.com

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2013

Keywords:
A156.4, door control-closers, door control

Company:
Universal International FZCO

Product Line: 
Door Control-Closers
Updated: 
Mon, 11/02/2015
ANSI/BHMA A156.4 Door Controls-Closers

ANSI/BHMA A156.4 Door Control-Closers

New Search

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2008

Company:
World Cross Co., Ltd.
Visit Website

Product Line: 
Door Control-Closers
ANSI/BHMA A156.4 Door Controls-Closers

ANSI/BHMA A156.4 Door Control-Closers

New Search

Contact:
huamin.shi@shenfeiliyi.com.cn

Standard:
ANSI/BHMA A156.4 Door Controls-Closers

Scope

ANSI/BHMA A156.4 – 2013  DOOR CONTROLS – CLOSERS
Revision of ANSI/BHMA A156.4-2008

1. SCOPE

1.1 This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. Optional tests which shall be specified separately are also included.

1.2 Tests in this Standard are performed under neutral air pressure laboratory conditions and between 60 and 85 degrees F. In actual usage results vary because of installation, maintenance, and environmental conditions. Actual closer performance is affected by fluctuating ambient conditions such as wind and pressure differentials, consult factory for recommendations.

1.3 Use on Fire Doors A door closer used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.

Approved by May 28, 2013

Publication Year:
2008

Keywords:
door control- closers, A156.4

Company:
Shenfei Liyi

Product Line: 
Door Control-Closers
ANSI/BHMA A156.4 Door Controls-Closers
Syndicate content